                  RIPE NCC Test Traffic Measurement Service and
                           Test Box Purchase Agreement

                            Jacqueline M.B. Seignette

                          Vogel & Ruitenberg Advokaten
                                   Amsterdam

                                 Henk Uijterwaal

                                    RIPE NCC

                                October 23, 2000

                              Document: ripe-214.ps

 Abstract

 One of the services offered by the RIPE NCC is the Test Traffic Measurements
 (TTM). The goal of the TTM is to collect data describing the performance of the
 network between providers such as network delays, packet losses or routing
 information, and to present the collected information in a useful format to the
 customer.

 In order to do these measurements, measurement probes will have to be installed
 at the site interested in this service. These probes are called "test boxes".
 The RIPE NCC will sell one or, depending on the network topology, more test
 boxes to the customer. After the customer has installed the test boxes, the
 RIPE NCC will operate them for the customer as "black boxes" measuring the
 performance of the networks between the customer and other sites hosting a test
 box.

 This contract describes the terms and conditions for the purchase of a test box
 and for the subsequent operation of the test box by the RIPE NCC.

 Customer

 Name:

 Legal Form:

 Registered Office:

 City/Country:

 Lawfully represented by:

 Billing and Administrative Contact Person:

 Name:

 Telephone number:

 Telefax number:

 E-mail address:

 Billing Address:

 Contract Specifications

 Number of Text Boxes to be delivered:

 Total Purchase Price:

 Shipping Costs:

 Installation Costs:

 VAT tariff:

 Number of Test Boxes for which Service is requested:

 Service Fee until 31 December of the current year:

 Service Fee subsequent years:

 VAT tariff:

 Test Box 1

 Site (Location at which Test Box will be installed):

 Technical Contact Person(s) at the Test Box Site:

 Name(s):

 Telephone Number:

 Telefax Number:

 E-mail address:

 Shipping Address:

 Shipping Instructions: SkyNet/FedEx/UPS

 FedEx or UPS customer number:

 Rack Space: available/not available

 Suitable antenna position: available/not available

 Estimated Maximum Cable Length:

 Estimated time needed to install the antenna:

 Remarks/Special requirements:

 Description of local network situation:

 IP-address for the Test Box:

 IP-address(es) of a local resolving name-server(s):

 IP-number of Default Gateway:

 Routing Protocol: RIP/IRDP/ none of the above

 Netmask for the machine:

 IP address (-range) for monitoring machines:

 Test Box 2 (3, 4, ...)

 Site (Location at which Test Box will be installed):

 Technical Contact Person(s) at the Test Box Site:

 Name(s):

 Telephone Number:

 Telefax Number:

 E-mail address:

 Shipping Address:

 Shipping Instructions: SkyNet/FedEx/UPS

 FedEx or UPS customer number:

 Rack Space: available/not available

 Suitable antenna position: available/not available

 Estimated Maximum Cable Length:

 Estimated time needed to install the antenna:

 Remarks/Special requirements:

 Description of local network situation:

 IP-address for the Test Box:

 IP-address(es) of a local resolving name-server(s):

 IP-number of Default Gateway:

 Routing Protocol: RIP/IRDP/ none of the above

 Netmask for the machine:

 IP address (-range) for monitoring machines:

 Signatures

 Customer and the RIPE NCC herewith enter into this Agreement including the
 General Terms attached hereto. Customer declares to have read and agree with
 the General Terms.

                   Customer      RIPE NCC

  Place:                       Amsterdam

  Date:

  Name:

  Position:

  Signature(s):

 General Terms to the RIPE NCC Test Traffic Measurement Test-Box Purchase and
 Service Agreement

 Article 1 - Definitions

      Agreement: Test Traffic Measurement Box Purchase and Service Agreement
      consisting of the Contract Form and these General Terms, including Annex A
      to E.

      Contract Form: Contract form specifying the Customer?s name and address,
      the number of Test Boxes purchased, the total Purchase Price and Service
      Fee as well as a description of the local situation at the Site as
      provided by Customer.

      Functional Specifications: The functional specifications applicable to the
      Test Box as set forth in Annex A hereto.

      Hardware and Software Requirements: The hardware, software and network
      requirements necessary to install and operate the Test Box as set forth in
      Annex A hereto.

      Installation Costs: Fee covering the costs made by the RIPE NCC in
      assisting Customer to install the Test Box.

      Installation Document: Document ripe-168 subsections 2 and 3 describing
      the installation procedure.

      Purchase Price: Total Price of the Test Box(es) to be delivered under this
      Agreement.

      Rights of Use: Uses of the Test Box (including TTM Software) to which the
      Customer is authorised under this Agreement.

      RIPE NCC: Rseaux IP Europens Network Coordination Centre (RIPE NCC), an
      association under the laws of the Netherlands with official seat in
      Amsterdam, the Netherlands.

      Service Fee: Annual fee to be paid by Customer to the RIPE NCC for the
      provision of the Services.

      Services: The services as specified in Article 4 of this Agreement.

      Site: Location at which the Test Box will be used by Customer, as
      specified on the Contract Sheet

      Test Box: Box provided by the RIPE NCC containing TTM Software for the
      collection of data on the performance of the network between providers
      such as network delays, packet losses or routing information, as further
      described on http://www.ripe.net/test-traffic.

      TTM Data: The data which may be collected from the Test Box.

      TTM Database: Database operated by the RIPE NCC containing TTM Data
      collected by the RIPE NCC.

      TTM Software: Test traffic measurement software embedded in the Test Box.

 Article 2 - Subject Matter of this Agreement

   1. Subject to the provisions of this Agreement, the RIPE NCC will sell and
      provide, and the Customer shall purchase the number of Test Boxes as
      indicated on the Contract Form and pay for the Services as specified in
      Article 4.
   2. In the event Customer enters into the Agreement for the provision of
      Services in respect of Test Boxes delivered by RIPE NCC prior to entering
      into this Agreement (see Contract Form), the RIPE NCC will provide and the
      Customer shall pay for the Services as specified in Article 4 in respect
      of these Test Boxes. Articles 3 and 9 do not apply to these Test Boxes.
      The physical ownership of these Test Boxes is transferred to Customer upon
      entering into this Agreement.
   3. This Agreement is independent from the standard RIPE NCC Service Agreement
      and RIPE NCC membership and does not entitle Customer to RIPE NCC
      membership services.

 Article 3 - Delivery and Installation

   1. The procedure for the delivery and installation of the Test Box is
      described in Annex B hereto.
   2. Subject to payment by Customer of the Installation Costs, the RIPE NCC
      shall assist Customer in installing the Test Box as described in the
      Installation Document.
   3. Customer declares that it has read the Installation Document and that the
      Site meets the Hardware and Software Requirements necessary to install and
      operate the Test Box.
   4. The Test Box shall not include keyboard, monitor, mouse, routers,
      firewalls and special hardware such as re-radiators, antenna splitters,
      cables, etc.
   5. After delivery at the Site, Customer will bear all the risks of loss,
      destruction or damage, whatever the cause may be.

 Article 4 - Services

   1. In consideration of the Service Fee and during the term of this Agreement,
      the RIPE NCC shall provide the services described in this Article.
   2. The RIPE NCC shall operate the Test Box by remote access in order to
      collect TTM Data. TTM Data shall be collected once a day by a central
      computer at the RIPE NCC. If the TTM Data could not be collected for a
      particular day, the RIPE NCC will try to collect the TTM Data the next day
      until the files expire after 30 days.
   3. The RIPE NCC shall store the TTM Data collected pursuant to 4.2 during a
      period of two years following the collection of the data.
   4. At the customer?s request, the RIPE NCC shall put the raw TTM Data
      retrieved from Customer?s Test Box on a ftp-server in ROOT format.
   5. The RIPE NCC shall correct errors, if any, to the best of its ability if
      the TTM Software due to such error does not meet the Functional
      Specifications. The RIPE NCC does not warrant that the TTM Software shall
      function without interruption or errors or that errors will be remedied.
      The Test Box contains a back up copy of the TTM Software which the RIPE
      NCC may switch on in the event of failure of the running copy.
   6. As soon as a new version of the software embedded in the Test Box is
      considered by the RIPE NCC to be ready for installation on distributed
      Test Boxes, the RIPE NCC shall install such new version on Customer?s Test
      Box by means of remote distribution, in accordance with the procedures
      described in document ripe-168.
   7. The RIPE NCC at its own discretion shall analyse the TTM Data and make the
      results available to Customer.
   8. The RIPE NCC shall take actions it deems appropriate to secure the Test
      Box operations and the TTM Data.
   9. The RIPE NCC may annually amend the Service Fee to reflect general price
      increases and to cover the total costs of its test traffic measurement
      operations. In the event the RIPE NCC decides to amend the Service Fee for
      the following calendar year, it will notify the administrative contact
      person thereof by post, fax or e-mail.
  10. The RIPE NCC shall not be obliged to correct errors if the Test Box has
      not been installed or operated in accordance with this Agreement, if the
      local configuration is not as described in the Contract Form, if the Test
      Box has been used incorrectly, incompetently or without authorisation or
      if the error is caused by external causes, such as fire, water, power
      outage or lightning.

 Article 5 - Local Management of the Test Box

   1. The RIPE NCC shall operate the Test Box from its central computer. Local
      Management of the Test Box shall be done by the technical contact
      person(s) indicated on the Contract Form in accordance with the procedure
      described in Annex D. Customer shall not undertake other acts in respect
      of the Test Box than those authorised in this Agreement.
   2. Customer shall take all reasonable technical and organisational measures
      to prevent unauthorised access to the Test Box, TTM Software and TTM Data.
   3. Customer shall not interfere with any UPD, TCP and ICMP based traffic from
      and to any port on the Test Box needed to operate the Test Box or to do
      measurements. Customer shall ensure that upstream providers do not place
      filters on this traffic.

 Article 6 - Rights of Use

   1. During the term of this Agreement, Customer shall have the right to use
      the Test Box (including TTM Software) in accordance with this Agreement in
      order to enable the RIPE NCC to collect data on loss and delay of messages
      sent and received by Customer?s network as described in the Contract Form.
      Customer shall not be entitled to use the Test Box and TTM Software for
      other purposes.
   2. Customer is entitled to review the source code of the TTM Software in
      order to detect whether the TTM Software may introduce security risks at
      the Site. Upon request, the RIPE NCC shall make the source code available
      to Customer for this purpose via the RIPE NCC FTP-server.
   3. Customer shall not be entitled to reproduce, modify and distribute
      reproductions or modified versions of the TTM Software unless necessary to
      exercise Customer?s mandatory user rights under the applicable copyright
      law.
   4. This Agreement and the sale of the Test Box pursuant to this Agreement
      does not in any way involve the transfer of any intellectual property
      right subsisting in the Test Box and TTM Software.
   5. The RIPE NCC shall indemnify Customer against claims by third parties that
      the Test Box or part thereof infringes on intellectual property rights
      owned by them, provided Customer promptly notifies such claim to the RIPE
      NCC and enables the RIPE NCC to handle the defence and settlement
      negotiations.

 Article 7 - TTM Data

   1. The RIPE NCC shall be entitled to retrieve, reproduce, store and combine
      TTM Data in order to perform the Services specified in Article 4.
   2. The RIPE NCC may provide TTM Data including the address and position of
      Customer?s Test-Box to another ISP if the data refer to communication
      between Customer?s Test Box and the Test Box of the other ISP.
   3. The RIPE NCC may provide anonymous TTM Data and analysis of anonymous TTM
      Data to third parties. The RIPE NCC furthermore shall be entitled to
      provide full TTM Data to third parties for scientific and statistical
      purposes after expiry of one year following the collection of the data.
      This provision shall survive the expiry or termination of this Agreement.
   4. Customer shall have access to the TTM Database at the RIPE NCC and the
      data contained therein only in order to download and analyse its own TTM
      Data and to compare them to the data made publicly available by the RIPE
      NCC on the network performance of other ISP?s.
   5. In presenting data from the TTM Database or analysis of these data to
      third parties, Customer shall comply with the data disclosure procedure as
      described in Annex E hereto and as provided in ripe-180.ps. Customer shall
      not present modified Test Box Data or analysis.

 Article 8 - Payment

   1. The RIPE NCC shall send Customer an invoice for the Purchase Price,
      Service Fee, Installation Costs and Shipping costs. The first invoice for
      the Service Fee shall be sent after delivery of the Test Box to Customer.
      The first invoice for the Service Fee pertaining to Test Boxes delivered
      to Customer prior to entering into this Agreement, will be sent to
      Customer directly after the Agreement has been entered into.
   2. Payment shall be made by Customer to the RIPE NCC within 30 days of the
      invoice date, failing which Customer shall be in default with no notice of
      default being required.
   3. With effect from the day on which Customer defaults on its payment
      obligations, Customer shall owe the RIPE NCC the statutory rate of
      interest on the amounts unpaid and reimburse the RIPE NCC for any
      extra-judicial collection costs, without prejudice to any other rights the
      RIPE NCC may invoke against Customer in connection with its failure to
      effect (timely) payment.
   4. Customer may not postpone its payment obligations under this Agreement or
      offset payment by any of its own claims against the RIPE NCC.

 Article 9 - Test Box Warranty, Repair, Replacement

   1. During a period of twelve months from the date of delivery, the RIPE NCC
      warrants that the Test Box delivered by the RIPE NCC pursuant to this
      Agreement is free from defects in materials and workmanship.
   2. The warranty may be exercised in accordance with the procedure described
      in Annex C.
   3. The warranty does not apply if the Test Box has not been installed or
      operated in accordance with this Agreement, if the local configuration is
      not as described in the Contract Form, if the Test Box has been used
      incorrectly, incompetently or without authorisation or if the defect or
      error is caused by external causes, such as fire, water, power outage or
      lightning.
   4. Customer may request repair or replacement of a Test Box or part outside
      the scope of the warranty in accordance with the procedure described in
      Annex C.

 Article 10 - Liability

   1. Without prejudice to the warranty provided in Article 9, the RIPE NCC
      shall not be liable against Customer for damage caused by a defect in the
      Test Box or a failure by the RIPE NCC to meet any obligation under this
      Agreement.
   2. The exclusion of liability provided in subsection 1 does not apply if the
      failure or defect is due to a grossly negligent or wilful act or omission
      by the RIPE NCC managing personnel.
   3. In no event shall the RIPE NCC be liable for indirect damages caused by a
      defect in the Test Box or a failure by the RIPE NCC to meet any obligation
      under this Agreement, including damage to the Customers business or loss
      of profits.
   4. Notwithstanding any other provision in this Article, the RIPE NCC shall
      not accept liability for:
         o mutilation or loss of TTM Data or other data during transmission or
           when stored on Customer?s computers;
         o the results and consequences of analysis of TTM Data undertaken by
           the RIPE NCC;
         o the consequences of any modification or adaptation to the Test Box or
           TTM Software made by Customer or from the combination of the Test Box
           or TTM Software with hardware or software other than that prescribed
           in the Hardware and Software Requirements.
   5. Notwithstanding any other provision in this Article, the RIPE NCC shall
      not be liable for damage as a result of a failure to meet any obligation
      under this Agreement if such failure is due to circumstances for which the
      RIPE NCC is not considered accountable according to law, contract or trade
      custom. The RIPE NCC in any event shall not be accountable for failures to
      perform resulting from the non- or untimely delivery of Test Box parts by
      suppliers or from interruptions or improper functioning of power or
      telecommunication services facilities.
   6. Customer shall indemnify the RIPE NCC for any third-party claims filed
      against the RIPE NCC in relation to Customer?s use of the Test Box or
      resulting from the non-performance by Customer of any obligation arising
      out of this Agreement.
   7. In no event shall the liability of the RIPE NCC in connection with this
      Agreement exceed the Service Fee invoiced in respect of the calendar year
      in which the damage first occurred. The maximum shall apply per event or
      series of connected events resulting in such liability.

 Article 11 - Term and Termination

   1. The Agreement shall enter into force when signed by both parties and,
      unless terminated pursuant to the provisions of this Article, shall run
      until 31 December of the following calendar year. Subsequent to this date,
      the Agreement shall be automatically extended with periods of one year
      each, unless one of the parties terminates the Agreement against 31
      December of the current calendar year by means of a written notice sent to
      the other party before 1 October of that year.
   2. Customer subsequent to the receipt of a notification as meant in 4.9 shall
      be entitled to terminate the Agreement subject to a three months written
      notice to the RIPE NCC.
   3. In the event Customer?s obligations under this Agreement are substantially
      enlarged pursuant to a change in the procedures described in Annex B, C, D
      or E or in the RIPE documents referred to in this Agreement, Customer may
      immediately terminate the Agreement by means of a written notice to the
      RIPE NCC. The RIPE NCC in that event shall reimburse to Customer the
      percentage of the Service Fee that corresponds with the remaining period
      of the current contract period.
   4. In the event of a substantial breach by Customer of any of the following
      provisions, the RIPE NCC shall be entitled to terminate this Agreement
      with immediate effect by giving written notice: 5.1, 5.3, 6.2, 7.4, 7.5,
      8.2.
   5. Without prejudice to 11.4, in the event of a substantial breach by a party
      of any other obligation under this agreement which is irremediable or
      which is not remedied within thirty (30) days of written notice from the
      other party requiring that it be remedied the other party shall be
      entitled to terminate this Agreement with immediate effect by giving
      written notice.
   6. In the event that any party during the term of this Agreement enters into
      bankruptcy or liquidation or any other arrangement for the benefit of its
      creditors, the other party shall be entitled to terminate this Agreement
      with immediate effect by giving written notice.
   7. Upon termination pursuant to this Article, the Rights of Use described in
      Article 6 and access to the RIPE NCC TTM database will terminate with
      immediate effect. The RIPE NCC shall be entitled and Customer shall
      co-operate to delete the TTM Software from the Test Box.

 Article 12 - Miscellaneous

   1. All the RIPE-documents referred to in this Agreement are available on
      http://www.ripe.net . Customer shall regularly take notice of updated
      RIPE-documents available on the web site. The RIPE-documents referred to
      in this Agreement as well as the procedures described in Annex B to E to
      this Agreement may be replaced by new documents or procedures. The RIPE
      NCC shall announce such replacements via the mailing list tt-host@ripe.net
      . The corresponding sections in the replaced texts shall apply to this
      Agreement from the moment of their replacement.
   2. Customer shall promptly notify RIPE NCC of any changes in the data on the
      Contract Form.
   3. In the event that one or more provisions of this Agreement would appear to
      be non-binding, the other provisions of this Agreement will continue to be
      effective.
   4. Without prior written authorisation by the RIPE NCC, Customer shall not be
      permitted to assign or sub-license any rights or assign or subcontract any
      obligations arising from this Agreement to a third party.
   5. The RIPE NCC shall be entitled to assign and subcontract this Agreement in
      whole or in part to a third party.
   6. The Agreement will be governed by Dutch law.
   7. The competent court in Amsterdam has exclusive jurisdiction in respect of
      any disputes which may arise in connection with this Agreement. An action
      for the payment of the Purchase Price, Service Fee, Installation Costs or
      Shipping costs may however also be brought before the competent court in
      Customer?s domicile.

 Annex A - Functional Specifications, Hardware and Software Requirements

 Functional Specifications

 A Test Box is an instrument for measuring quantities related to network
 performance, such as delay, packet-loss or routing information, according to
 the metrics defined in RFC's 2330, 2679 and 2680.

 Hardware and Software Requirements

    * a PC consisting of:
         o An Intel Celoron 500 MHz processor, on an Intel motherboard
         o 256 Mb RAM
         o 2 Seagate IDE hard-disks, 8 Gb capacity each, in removable disk
           canisters
         o a 3COM 3C905B Ethernet interface
         o an interface card for the GPS receiver, designed and built by NIKHEF
         o a video card capable of displaying 80x25 characters
         o a 19" rack-mount cabinet
         o a power supply suitable for 110 and 220V AC
    * a Trimble Palissade GPS receiver
    * 15m of CAT5-cable to connect the GPS receiver to the PC
    * power cables with standard European plugs.

 or equivalent or better hardware

 Annex B - Delivery and Installation Procedure

   1. As soon as the delivery of components and the RIPE NCC?s production
      schedule permits and the Purchase Price has been paid, the RIPE NCC shall
      configure and deliver the Test Box(es) to Customer. The RIPE NCC shall
      test the Test Box before shipping to verify that the hardware components
      perform according to the specifications of the vendors, that the software
      has been properly installed and that the Test Box has been configured
      according to the data provided by the Customer.
   2. The costs of shipment of the Test Box/Boxes shall not be included in the
      Purchase Price. Any shipping costs, taxes and import/export duties
      incurred by the RIPE NCC or any shipping company hired by the RIPE NCC in
      relation to the shipment may be charged to Customer. The RIPE NCC and its
      authorised shipping company shall be entitled to withhold/retain the Test
      Box/Test Boxes until payment of such costs has been made to the RIPE NCC.
   3. Customer shall install the Test Box in accordance with the Installation
      Document. Installation is at Customer?s own responsibility and expense.
      Customer is responsible for installation of cables and the setting up of
      other hardware such as routers or fire-walls required to operate the Test
      Box.
   4. During a period of 90 days from the date of delivery of the Test Box, the
      RIPE NCC shall provide on request to Customer e-mail support (
      tt-ops@ripe.net ) to help Customer with the installation of the Test Box.
      The initial response on an e-mail request for support shall be within one
      (1) working day after receipt of the e-mail by the RIPE NCC.
   5. The RIPE NCC shall not provide on-site support. The parties may agree on
      additional arrangements for a RIPE NCC engineer to do a site-survey or
      support the installation against payment of a fee and reimbursement of
      travel costs.

 Annex C - Warranty, Repair and Replacement Procedure

   1. Customer notifies the RIPE NCC of a problem with the Test Box by e-mail
      (tt-ops@ripe.net). If the Test Box has been damaged during shipment,
      Customer also notifies the shipping company. The RIPE NCC shall reply via
      e-mail whether the problem is covered by the warranty and give
      instructions to Customer to solve the problem. Customer will follow the
      instructions.
   2. If the problem cannot be solved by means of the instructions received from
      the RIPE NCC, Customer shall request the RIPE NCC by e-mail (
      tt-ops@ripe.net ) to repair or replace the Test Box or a part thereof.
      RIPE NCC shall provide instructions to Customer on how to return the Test
      Box to RIPE NCC.
   3. The costs of shipping the Test Box or part to the RIPE NCC and back to
      Customer shall be charged to Customer.
   4. If Customer requests the RIPE NCC to repair or replace the Test Box or a
      part outside of the warranty, the RIPE NCC shall charge Customer the
      regular purchase price or the costs of repair, as well as the costs of
      shipment.
   5. The RIPE NCC at its own initiative or at the request of Customer may
      undertake trouble-shooting together with the local contact person to
      detect defects of the CPU. The RIPE NCC decides if a Test Box has to be
      sent back for repair.
   6. The RIPE NCC shall inform Customer by e-mail when the replaced or repaired
      Test Box or part will be delivered to Customer.

 Annex D - Local Management Procedure

   1. At least one of the technical contact persons indicated on the Contract
      Form shall be minimally available by telephone and e-mail (number and
      address described in Contract Form) from Monday to Friday (except public
      holidays) during normal regular business hours in order to solve problems
      in accordance with the procedure described in subsection 2.4 of the
      Installation Document.
   2. During absence of the technical contact person(s) specified in the
      Contract Form, Customer shall provide for a replacement available to the
      RIPE NCC under the same telephone number and e-mail address.
   3. The technical contact person(s) shall regularly read the information
      provided by the RIPE NCC on the mailing list tt-host@ripe.net to which he
      will be automatically subscribed.
   4. Requests for local support shall be accessed and dealt with by a technical
      contact person only.
   5. If a Test Box causes problems and there is no technical contact person
      available, the RIPE NCC may remove the Test Box from the measurement
      network until the problem can be solved.
   6. Customer shall inform the RIPE NCC ( tt-ops@ripe.net) of a power outage
      planned by Customer at least one (1) working day in advance. The RIPE NCC
      shall perform a regular shutdown of the Test Box shortly before the power
      outage and inform the technical contact person when the Test Box can be
      re-booted.
   7. The technical contact person may perform an emergency system stop only if
      such is necessary to avoid damage to the Test Box, Test Box Data or local
      network and the RIPE NCC cannot be informed in time to take appropriate
      actions to avoid such damage. The emergency system stop shall be performed
      in accordance with the procedure described in Document ripe-179, Appendix
      B. The technical contact person informs the RIPE NCC ( tt-ops@ripe.net )
      immediately following the emergency stop
   8. If the configuration data of the Test Box has to be changed, Customer
      shall provide the RIPE NCC (tt-ops@ripe.net) with the new data and the
      date at which they become effective at least one (1) working day in
      advance. After the RIPE NCC has reconfigured the Test Box and shut the
      Test Box down, it shall inform Customer when the Test Box can be
      re-installed. Customer shall re-install the Test Box in accordance with
      the procedure described in the Installation Document.

 Annex E - Data Disclosure

 Customer is free to discuss the analysis inside its organisation or the
 relevant RIPE working group. In order for TTM data or an analysis of data to be
 presented to the outside world, the data and analysis first have to be
 verified. To this end, Customer shall provide a write-up of the data and
 analysis that includes enough detail for anybody to independently re-implement
 the data and the analysis and to verify its conclusions. This write-up will be
 circulated by the RIPE NCC amongst (a subset of) the ISP's using a Test Box for
 a peer review. If there are objections to an analysis or the accuracy of the
 data, it will be discussed with Customer what changes in the publication will
 have to be made in order to make it acceptable. If an ISP still disagrees, they
 can ask that data related to their site is removed from the analysis. An ISP
 however cannot veto the publication of an analysis. Published data shall not
 include references to names of other ISP's, IP-addresses of Test Boxes and
 routers and the like if this is not strictly necessary.

